5 Ways Precision Application Is Creating Opportunities in the Field

Precision Application Field sprayer
Advancements in the area of precision technology on sprayers are changing the way products are applied.

Throughout the years, precision agriculture has facilitated improvements to farming equipment, from auto-steer on combines to variable rate seeding on planters. These changes enhance functionality and allow growers to farm smarter and more efficiently.

Sprayer technology has remained relatively unchanged for the last several years, leaving room for improvement. Recently, however, there have been several advancements in the area of precision technology on sprayers, looking to change the way that products are applied.

Top manufacturers recognized the challenges of traditional application and have begun introducing solutions, such as independent section control to auto-nozzle switching based on speed. John Deere, for example, released its new ExactApply nozzle control system to give growers more control over everything from droplet size to pressure, and adapt to varying speeds, curves, and sensitive areas such as waterways.

The different brands of sprayers function in different ways, but regardless of which sprayer a grower chooses to operate, precision application equipment addresses the same challenges across all platforms.

How It Works

In the case of John Deere’s ExactApply system, many features from traditional systems, such as section control and variable rate application, are maintained but have been further enhanced. For example, on traditional sprayers there were three sections, one for the center and one on each of the booms. With the new ExactApply system, growers have individual nozzle control and can have as many sections as there are nozzles. This increases accuracy and better controls input costs.

The systems also offers A/B nozzle switching, which allows for manual or automatic switching between nozzles to better adapt to field conditions, speed, and application rates. For example, a low-drift nozzle may be used on the field edges and headlands, and then the operator could choose to use a different nozzle for spraying the interior of the field.

While different products offer different features and degree of control for growers, they’re all based on one common principle: more control equals better spraying, which results in less product wasted, and therefore, greater savings. The value of precision application comes from five major capabilities.

1. Application Consistency at Every Speed

In order to be its most effective, spray application rate must be consistent. One of the biggest challenges to maintaining this consistency comes when changing ground speed. Traditionally, sprayers adapt to changing ground speed by modifying spray pressure, however this can result in poor crop coverage. With precision application products, growers can set sprayer nozzles to auto-adjust based on the sprayer’s current speed, which allows them to maintain a steady application rate.

For example, a sprayer’s auto-adjustment can be set so that nozzle X applies at speeds up to 5 mph. When the sprayer goes above 5 mph, nozzle X will shut off and nozzle Y will activate. When the sprayer reaches the highest speed, for example, 12 mph, both nozzles X and Y would activate, working together to maintain the target application rate, ensuring consistency in coverage.

2. Pressure and Droplet Size

As with application rate, droplet size must also remain consistent for best results. Some auto-adjust systems that don’t offer individual nozzle control can still adjust to the sprayer’s speed, but with a change in pressure instead. At lower speeds, the system lowers the pressure, applying less product. This is only somewhat more efficient, as it also results in a change in droplet size, which then leads to inadequate coverage.

Thanks to pulse-width modulation on newer systems, desired pressure remains the same in the boom. The system instead changes the frequency and duty cycle of pulsing to adjust the rate, resulting in consistent droplet size and therefore improved coverage.

3. Curve Compensation Coverage

Precision application systems are also designed to maintain specific coverage throughout a field, even when operating along curves. This concept of “curve compensation” (discussed in detail in this article) utilizes individual nozzle pulsing and the system’s auto-adjust capabilities. When the sprayer turns, the system adjusts, automatically applying less product to the inside rows and more to the outside rows. This ensures that inside rows won’t suffer from over-application and outside rows will still receive the prescribed rate. Coverage is ideal across the entire length of the boom.

4. Skip and Overlap Reduction

Individual section control is especially important when dealing with unique field characteristics such as border areas, waterways, or sensitive crops. Precision application systems provide this control by allowing individual sprayer sections to be shut off, which reduces skips and overlaps. For example, as a sprayer approaches a waterway, individual sections can be turned off, preventing product from being applied over the water. The sections then reactivate once the boom has reached an area to be sprayed, immediately pick up coverage again.

5. Drift Management

Some crops require much finer application, or smaller droplet size; however, it can result in chemical drift to adjacent fields or crops not intended to be sprayed. This problem can be reduced with A/B nozzle switching, mentioned earlier.

When outlining a field, a grower can switch to a lower-drift nozzle, reducing the amount of material that drifts, and preventing potentially harmful effects to surrounding vegetation. When working towards the interior of the field, the grower can then switch back to a more conventional nozzle.

Additional Considerations

While precision application equipment is designed to put more control in the hands of growers, it is still recommended that growers maintain a close partnership with trusted advisors, such as agronomists or dealership personnel.

Agronomists, for example, can provide information about the many products available, as well as educate growers on the various regulations that govern use, such as maximum application rate and nozzle specification. An agronomist or other knowledgeable precision product specialist can help growers follow guidelines and apply the right product at the right time.

Another good resource for growers is John Deere’s GoSpray app. This app provides instructions for proper equipment setup and maintenance, giving equipment operators and technicians the opportunity to best optimize their machines. Key personnel at most dealerships are familiar with these apps and can assist growers in putting them into practice on the farm.

By offering growers greater control over product application, new precision technologies make the process more accurate, effective, and economical.


Nate Dorsey is an Agronomist for RDO Equipment Co. based in Moorhead, MN. Connect with him on Twitter @RDONateDorseyTo learn more about precision application and John Deere’s Exact Apply nozzle control system, contact your local RDO Equipment Co. store.

Leave a Reply

Tools & Smart Equipment Stories
DronessenseFly Launches eBee X Drone, Breaks Through 1,000 acre Coverage Ceiling
September 5, 2018
senseFly today reportedly sets a new standard in mapping tools with the launch of the eBee X. Launched with the Read More
John Deere ExactApply
AmericasSciFi in Ag: Self-Reacting Spray Nozzles to Fight Dicamba Drift
September 5, 2018
Article Notes: This monthly column takes some crazy sounding ideas and applies them to the field of Ag Tech. The Read More
Tools & Smart EquipmentCanadian Planter Manufacturer Purchases Harvest International
July 19, 2018
Seeding and planting technology innovator Clean Seed has signed an agreement to strategically acquire U.S. planting equipment manufacturer Harvest International, Read More
Robotics/Labor SaversStine Seed Plunks Down $5 Million on Smart Ag’s Driverless Tractor Kit
June 14, 2018
Stine Seed Farm has invested $5 million in Smart Ag Inc., an Iowa technology firm that has developed a full Read More
Trending Articles
Sensors
Sensors/IoTThe Answer to Agriculture’s Daunting Challenges – Soil Sensors
September 20, 2018
According to the United Nations, 9.6 billion people will live on planet Earth by 2050. Feeding these mouths will require Read More
Soil-Hand
Data ManagementAre You Using Your Soil to Its Full Potential?
September 14, 2018
Harvest is progressing across most parts of the U.S. and those growers who aren’t already harvesting are gearing up to Read More
Grower-Retailer
Imagery/SensingAgtech: 10 Things I Hate About You!
September 4, 2018
Before you get bent out of shape from the title, remember if you’ve read my articles before you know I Read More
Kansas State University
Industry NewsKansas State University, Topcon Form Precision Ag Research Partnership
August 30, 2018
Kansas State University and Topcon Agriculture are collaborating to develop tools and systems to advance precision agriculture and support farmers. Read More
Blockchain building block graphic
Specialty CropsIs Blockchain the Future of Food Safety?
August 24, 2018
When the Internet Protocol Suite (TCP/IP) was standardized in 1982, permitting the worldwide proliferation of interconnected networks and eventually the Read More
WinField’s Joel Wipperfurth On Empowering Data-Driven Decisions
InfoAg ConferenceOne on One with Joel Wipperfurth, Winfield United
August 15, 2018
Winfield United's Joel Wipperfurth discusses ag technology trends and topics during last month’s InfoAg Conference. Read More
Latest News
Satellite
AmericasArgentina Bets on $600m Satellite to Boost Agriculture …
September 25, 2018
Argentina is launching a new microwave imaging satellite to monitor natural disasters and soil moisture, in a long-term bid to Read More
AmericasFarmers Edge Announces New Retail-Facing Precision Ag P…
September 25, 2018
Farmers Edge announced the launch of a new solution designed exclusively for agricultural professionals to enhance their relationships with customers Read More
FIRA
EventsAgricultural Robotics Take Center Stage at FIRA 2018
September 24, 2018
The future of agricultural innovation will continue to rely heavily on collaboration and exchange of ideas among all industry players. Read More
Corn field sunset
Decision Support SoftwareLand O’Lakes SUSTAIN Launches Ambitious Digital S…
September 24, 2018
Land O’Lakes SUSTAIN today announced its plan to roll out the Truterra Insights Engine, an interactive on-farm digital platform that Read More
Business ManagementIvy Tech, Farmers Partner to Help Precision Ag Educatio…
September 20, 2018
Harvest time has taken on a new meaning for some Wabash Valley farmers, and Bobbi Hunt-Kincaid hopes her family’s first Read More
Sensors
Sensors/IoTThe Answer to Agriculture’s Daunting Challenges – Soil …
September 20, 2018
According to the United Nations, 9.6 billion people will live on planet Earth by 2050. Feeding these mouths will require Read More
Google-Earth-Map-featured-image
Data ManagementRainfall Revisited: Accurate Observations and Beyond
September 18, 2018
As a provider of weather analysis and forecast services to the agricultural industry, one of the most common questions I Read More
PenelopeNagel
Business ManagementWhy Is Funding a Challenge for Women-Led Agtech Compani…
September 17, 2018
When it comes to women-led agtech companies the funding discussion never seems to cease. In June after the The New Read More
Mobile Phone in field
Decision Support SoftwareWhy Are 570 Million Farmers Not Yet Using Agricultural …
September 17, 2018
Until recently, using agricultural apps and software was a rare practice among growers. This is now changing. The mass adoption Read More
Soil-Hand
Data ManagementAre You Using Your Soil to Its Full Potential?
September 14, 2018
Harvest is progressing across most parts of the U.S. and those growers who aren’t already harvesting are gearing up to Read More
Grower Services & SolutionsDeere-Granular Collaboration Produces New Profit Maps T…
September 14, 2018
The newest development from the ongoing John Deere-Granular product development and marketing collaboration is Profit Maps, now available to farmers Read More
Wingtra
DronesOpinion: Combining Two Pluses with the WingtraOne UAV
September 13, 2018
For the every-day consumer interested in UAVs, there is an ocean of products from which to choose. This includes the Read More
Farmer-tablet
AsiaShould Agri-Input Manufacturers Outsource E-Commerce to…
September 12, 2018
Editor’s note: Venky Ramachandran is a contributing writer for PrecisionAg.com’s sister site, AgriBusinessGlobal.com. This article was originally published on LinkedIn. Now, Read More
ICON-Link-Licensing_featured-image
Industry NewsValley Irrigation Adds Remote Irrigation Management Opt…
September 11, 2018
Valley Irrigation, an industry leader in smart irrigation solutions, has announced enhancements to its remote management technologies. Multi-Year Licensing In Read More
Reflex-Connect-Agri-Inject-featured-image
Variable Rate ApplicationVariable Rate Fertigation System Expands with Mobile Co…
September 10, 2018
Building on the success of its Reflex Variable Rate Fertigation system, Agri-Inject has taken fluid injection to the next level Read More
Industry NewsTeralytic Earns Ag Data Transparent Certification
September 10, 2018
Soil analytics company Teralytic has completed the Ag Data Transparent certification, affirming that their data use is private, secure, and Read More
Business ManagementTop 20 Two-Year Colleges for Precision Agriculture
September 10, 2018
Earlier this year, I compiled a list of the 25 best colleges for precision agriculture. It was quite the process. Read More
Industry NewsRaven, Topcon Announce Slingshot API Agreement
September 6, 2018
Raven Industries and Topcon Agriculture announced today a licensing agreement for Topcon Agriculture’s use of the Slingshot Application Programming Interface Read More