Split Nitrogen Application: Where The 4Rs Get Real

Y-Drop 360 Yield
360 Yield Center’s 360 Y-Drop tool, attached to spray booms, drizzles nitrogen at the base of the stalk.

When Illinois Grower Jeremy Wilson hit the farm conference circuit these past two years, one of his talks was always packed out — the story of his intense nitrogen management approach. His opening statement declared, “If you’re not applying nitrogen three times a year, you need to re-think your nitrogen plan.”

While many may view such a program as extreme, the current value of and methods for split application deserve a look.

Estimates on just how much split application is being done in the U.S. — and where — vary. John Larkin, Marketing Manager with 360 Yield Center, would put the number of growers doing split application at 30%, plus or minus 10%.

Use of in-season applications has been a common practice in the humid regions of the U.S. — and is becoming even more prevalent — especially along the East Coast, notes Dr. Harold van Es, Professor at Cornell University and lead inventor of the Adapt-N nitrogen modeling program. Environmentally sensitive areas like the Delmarva Peninsula have long committed to spring and in-season application.

In Illinois, Jean Payne and Dan Schaefer of the Illinois Fertilizer and Chemical Association (IFCA) say splitting nitrogen applications started in the late 2000’s with improvements in application equipment. Then too, farmers who experimented with it saw benefits in being able to apply nitrogen in ways that improved utilization.

Payne and Schaefer say that in the last five years, the movement has accelerated with nearly all fertilizer retailers being able to service a split application program for all forms if nitrogen: ammonia, UAN and urea.

Wilson, who is also a Technology Specialist at Crop IMS, is somewhat skeptical. He believes adoption is limited and estimates that 75% to 80% of nitrogen is still being placed using just one pass, whether it’s a fall application, early preplant or a sidedress.

Heading West

Towards Big Sky country and the Dakotas, Brent Wiesenburger, Precision Ag Manager at South Dakota Wheat Growers, Aberdeen, SD, reports that about 20% of his company’s corn acres are getting split applications of nitrogen.

“We are very dependent on rainfall in the Dakotas and tend to dry out very quickly. A split application allows a grower and agronomist to analyze the crop yield potential and make incremental investments in nitrogen if it looks like it is going to be a good year,” he says. In dry years, growers don’t spend the extra money on that second or third pass of nitrogen. In many cases, Wheat Growers will blend ammonium sulfate in on the second or third pass as well, as they are both mobile nutrients.

In Kansas, Nathan Woydziak, Preci­sion Ag Manager at Crop Quest Inc., says uniform split applications have been used for decades there. In wheat, for example, part of the nitrogen needed is applied in the fall, then another is considered in spring, depending on environmental and crop conditions.

In irrigated crops, the concept is “pretty simple” to implement, Woydziak says, with the first dose of N applied in fall or early spring (often done variable rate), then the rest is “spoon fed” through the pivot as the crop progresses through the season. Split application has been embraced as a good management practice. And it’s especially important in sandy areas where N leaches more easily through the soil profile.

Benefits In Brief

The main benefit of split application is that it provides much higher nitrogen use efficiency, plus the ability to prevent nitrogen losses in wet springs. Farmers save money and greatly reduce environmental losses, especially when they add the use of a good weather-based nitrogen advisor or nitrogen model, says Cornell’s van Es.

Sometimes it takes a shake-up to prove a practice and increase adoption. Yield 360’s Larkin describes how in the summer of 2015, much of the Corn Belt had heavy rain events that flushed nitrates out of the root zone. Late season rescue applications of nitrogen had a dramatic impact on yield.

“Then in 2016, which was an ideal growing season in many areas, and we saw heavy mineralization — so nitrogen was rarely a limiting factor in yield. But those growers who had adapted a split N program the previous year had the flexibility to reduce their last N application rate and pocket input cost savings while maintaining the yield potential,” Larkin explains.

This ability to stay nimble and flexible and react to the seasonal variation in N availability has helped growers understand the profit potential in mid-season application, he emphasizes.

Challenges To Widespread Use

Experts listed a number of roadblocks that stand in the way of wider adoption of split programs:

Resources. Additional applications, especially late season work, take additional equipment, manpower and time.

Convenience. Quite simply, fall is when there’s time to get the chore of fertilizer application completed and crossed off the to-do list.

“It is also risky to have a deficient crop standing out there knowing a grower’s application window is quickly disappearing in late June to early July as the crop is growing very rapidly,” says Wheat Grower’s Wiesenburger.

Then too, the actual speed of different equipment used for additional applications varies. Wilson points out that applicator operators just can’t get over the same number of acres with a rig sporting a coulter bar injecting fertilizer as they can with a high-clearance spreader applying urea.

Weather. Will weather conditions permit getting back into fields later? If a grower holds back nitrogen until post planting and then it rains, there is a risk they miss the application window and run out of nitrogen — or they need to bring a plane in to fly expensive urea on the field, says Yield 360’s Larkin.

He would add: “That’s one of the advantages of the Y-Drop system: by extending the window to V11 or even VT, there is a very wide window and little risk of missing out,” he adds.

Yield 360’s Y-Drop tool, attached to spray booms, drizzles nitrogen at the base of the stalk. “In fact, we hear people talking about ‘Y-Drop season’ now, meaning a mid or late season application using the Y-Drop system. That certainly didn’t exist three years ago,” Larkin notes. Yield 360 also offers Y-Drops that mount on an applicator bar for sidedressing.

Cost. Growers perceive — and it’s sometimes true — that anhydrous is the cheapest form of nitrogen and is relatively stable.

Supply and Demand. Fertilizer is a commodity, and price fluctuations can influence nutrient decision-making, say IFCA’s Payne and Schaefer. It can either delay application or tempt a grower to want to apply a product (either N, P or K) to take advantage of a price shift in the nutrient cost. The price difference between ammonia versus UAN or urea can also influence an application decision.

Clients. Retailers have to determine which customers might be open to multiple applications. “If you have growers who are pushing that nitrogen application to the max in an early application, they are probably not the guys to talk to,” Wilson says.

Instead, pick growers who are doing some of their applications themselves. They’re set up to do their first two passes, they have all their own equipment to do an early preplant or even a fall application. “I think an area where they can do fall anhydrous — like central and northern Illinois — is even better.” Wilson would recommend these growers pull back on fall work, with the thought of potentially putting on two applications in season.

“Also look at producers that are running on the lighter side of what you believe is enough to grow the kind of corn they want to grow. I think the likelihood of success is probably much higher there,” he adds.

This practice is not for everyone, Wilson stresses. “The return has to be positive to the grower or it’s ridiculous to even talk about it.”

Mapping Soil Variability

Experts say another roadblock to wider use is identifying where and when split applications — uniform or variable rate in-season — bring benefit. That’s where soil mapping that pinpoints field variability plays such a crucial role. And while there is some debate on zone versus grid approaches, the goal is to organize as much georeferenced data as possible.

Eller Gator pulling Veris probe soil sampling
Veris Technologies’ on-the-go sensors probes measure pH, organic matter and electrical conductivity. Here the unit is pulled by a John Deere Gator.

A wide array of tools are available for the job, but some of the most cutting edge have been Veris Technologies’ on-the-go sensors. The probes measure pH, organic matter and electrical conductivity (the last two being indicators of soil texture and water and nutrient holding capacity).

Just in February, Veris introduced the iScan, an implement-mounted soil sensor. In the past, the company’s sensors made independent passes across the field. With the iScan, users can mount them on tillage tools on planters for real-time data collection. “It’s easier, less expensive, and there’s less input required to collect the data,” says Tyler Lund, director of sales and marketing.

“Growers know they have a little bit of variability in their fields, they don’t understand just how different the soils can be,” he says. “When they’re actually involved in the data collection process because the sensor is mounted to the tool, tillage or planter, they’re going to be confronted with a real-time display of that map. So they’ll see those patterns emerge. Once you’re eyes are opened to the level of differences in your field, you don’t want to go back to managing it as if it was one type of soil.”

Enter split applications. “The reason we don’t want to apply nitrogen all at once is we know we can lose it, and our level of loss throughout the field is different,” says Lund.

Two soils
Two soils with different nitrogen loss characteristics found within the same 2.5 acre grid and USDA Soil Survey unit by a Veris soil sensor.

To help more growers understand the variability of their soils better, Agronomic Technology Corp. recently introduced N-Insight, an instant nitrogen diagnostic that is simple enough for producers to deploy on their own in every field or subfield. It’s based on the same platform that produces Adapt-N, which is known for its industry-leading nitrogen modeling validation, says Steve Sibulkin, company CEO.

“It’s a ‘conversation starter’ that quantifies a grower’s nitrogen loss in each of the past five years and allows him to get a real sense of likely outcomes due to changes in timing, rate and nitrogen source,” says Sibulkin. He explains that retail and coop agronomists use N-Insight to help growers understand the value of split application, the need for nitrogen stabilizers, and more.

Going Deeper

What about doing variable rate applications in-season? Wheat Growers’ Wiesenburger say his team is not doing them yet as part of its zone management program (MZB). “We simply give growers credit for X pounds of in-season nitrogen and remove that amount from our variable rate application. This makes the approach more operationally friendly in crunch time in season — and it’s also well received.

Wheat Growers has been looking at in-season nitrogen management tools to help staff variable-apply and make decisions on the fly, but the firm has struggled operationally to get tissue sampling done, manage in-season satellite images, etc.

Dr. John Fulton, Associate Professor at The Ohio State University, does note that imagery is becoming cheaper and more accessible to growers and their agronomists. It can reveal crop vigor and health variability — leading to opportunities to vary N rates in-season, especially later in the season. He could easily see growers making three or even four N applications to a corn crop, though not every year.

“Variable-rate applying nitrogen based on imagery can work well, but in our area it requires some investigative work, says Crop Quest’s Woydziak. “We have to be confident that what the image is showing us aligns with what the boots on the ground tell us.”

Crop Quest agronomists perform regular field checks to ensure what they are seeing in the images matches what they see on farms. When the two agree, then imagery can be used in-season to address problems.

“Again, all of this will get better and easier with time and technology, it is just a matter of getting our feet wet and understanding the challenges and adapting as we go. Five to eight years from now I believe VR in-season application will be standard practice and become something we just plan to do,” says Wheat Growers’ Wiesenburger.

Leave a Reply

One comment on “Split Nitrogen Application: Where The 4Rs Get Real

  1. We have been doing split nitrogen applications in Florida for a long time. Our soils won’t hold much nitrogen so it doesn’t make sense to waste valuable nutrients. Some of the newer fertigation systems basically spoon feed nutrients to the crops.

Tools & Smart Equipment Stories
Farmers on Tablet Photo Credit All About Food
Professionals6 Keys of Successful Precision Agriculture Tools
May 17, 2017
As precision agriculture professionals we are frequently approached by companies that wish to partner with our organization in order to Read More
Case IH Autonomous concept vehicle
ProfessionalsOpinion: What the Heck is A.I. Going to Do for Agriculture?
April 24, 2017
Let’s pause from the daily toils of ag for a minute and start thinking about the future. In a very Read More
ProfessionalsAgFunder: Clean Seed’s Wireless Smart Seeder is Set to Disrupt Agriculture
April 21, 2017
(Via AgFunderNews.com) Heard of Clean Seed Capital Group? No? You will very soon because this Canadian company has been quietly Read More
Precision Application Field sprayer
Tools & Smart Equipment5 Ways Precision Application Is Creating Opportunities in the Field
April 19, 2017
Throughout the years, precision agriculture has facilitated improvements to farming equipment, from auto-steer on combines to variable rate seeding on Read More
Trending Articles
PrecisionAg Vision Conference
EventsPrecisionAg® Vision Conference: Focused on the Future
June 13, 2017
PrecisionAg® is pleased to announce the return of its PrecisionAg Vision Conference, October 10-12, 2017. Based on overwhelmingly positive response Read More
Gavin Newsom Forbes AgTech-Summit
ProfessionalsAgTech Summit Aiming High for Modern Farming Solutions
June 12, 2017
THRIVE AgTech, in partnership with SVG Partners and Forbes, is hosting the third annual Forbes AgTech Summit June 28-29 in Read More
Quantix Drone Farmer
DronesTop 10 Most Intriguing Technologies in Agriculture
June 3, 2017
This may be a bit of stating the obvious here, but we’ll throw it out there anyways: as much as Read More
Farming iPad
Data ManagementOpinion: ROI or Die in Precision Agriculture
May 12, 2017
The thought of $3.50 corn for the foreseeable future seems pretty disheartening. However, if you look at the precision ag Read More
BASF Maglis grower retailer tablet
Data ManagementQ&A: What BASF’s Latest Foray into Precision Ag Means For Growers
May 11, 2017
In late April, BASF agreed to acquire U.S. precision ag player ZedX, a leader in the development of agronomic weather, Read More
Mung beans Australia
InternationalPrecision Ag in a Tough Season in Australia
May 8, 2017
This year’s summer crop season has been a tough one for most growers in Australia. Prolonged periods of high temperatures Read More
Latest News
Ag Retailer and Growers with tablet WinField United
Grower Services & SolutionsWinField Adds AkerScout App to Answer Tech
June 27, 2017
As farmers and retailers, we know it’s important to have the latest news and insights about tools that can make Read More
Data ManagementCDMS Announces SeedIQ Acquisition
June 26, 2017
Crop Data Management Systems, Inc., (CDMS) announces the acquisition of SeedIQ as part of its growth plan to provide complete Read More
Cotton closeup
Imagery/SensingCotton Growth Management with Precision Agriculture
June 20, 2017
A cotton crop presents some important differences to other commodities that are widely produced in Brazil, such as soybean and Read More
Corn Field
Industry NewsCNBC: Inside Amazon’s Whole Foods Takeover
June 20, 2017
Amazon’s takeover of Whole Foods sent the stock of competing grocery chains plummeting. To understand why, you need to know Read More
DronesNavigating a New World: Drone Technology in Agriculture…
June 20, 2017
My first exposure to unmanned aerial vehicles (UAVs) was as a master’s student at Kansas State University. I was researching Read More
Precision Ag Innovation Series
EventsInnovation Series Agenda Zeroes In On Maximizing Key Se…
June 14, 2017
In a recent survey of service providers conducted by PrecisionAg® Professional magazine, more than seven in 10 indicated that variable Read More
Soil Scientists
Data ManagementAccessing USDA Soil Data for Precision Farming
June 13, 2017
Many precision farming websites have integrated the USDA NRCS soil survey database using the USDA Soil Data Access web portal. Read More
GEOSYS In-Season Imagery
Decision Support SoftwareGeosys Announces Imagery and Weather Data Offering
June 13, 2017
Geosys, a provider of agronomic decision support tools, today launched Geosys Labs, a new program that will make its global Read More
PrecisionAg Vision Conference
EventsPrecisionAg® Vision Conference: Focused on the Future
June 13, 2017
PrecisionAg® is pleased to announce the return of its PrecisionAg Vision Conference, October 10-12, 2017. Based on overwhelmingly positive response Read More
Decision Support SoftwareMyriad Mobile Raises $1.5 Million to Launch New Ag-Tech…
June 12, 2017
Myriad Mobile, a software technology company focused on mobile and web applications, has raised $1.5 million in a Pre-Series A Read More
center-pivot-irrigation-drop-sprinklers-on-corn
Variable Rate ApplicationVariable-Rate Fertigation Can Be Simple
June 12, 2017
A rule is a rule is a rule, right? Well, not always. Sometimes, rules are meant to be changed. Most Read More
Gavin Newsom Forbes AgTech-Summit
ProfessionalsAgTech Summit Aiming High for Modern Farming Solutions
June 12, 2017
THRIVE AgTech, in partnership with SVG Partners and Forbes, is hosting the third annual Forbes AgTech Summit June 28-29 in Read More
Sensors/IoTLeveraging IoT to Improve Data Collection for Agricultu…
June 12, 2017
Between population growth and climate change, farms of all sizes are being challenged to increase yields. Internet of Things (IoT) Read More
DronesAg Drone Update: The Hunt for 1,000 (OPINION)
June 10, 2017
Having obtained my FAA Part 107 Commercial Drone Operators license back in September of last year, I’ve spent the past Read More
Industry NewsMergers & Acquisitions: Land O’Lakes Tosses E…
June 9, 2017
Land O’Lakes has made a minority equity investment in EFC Systems, an ERP (Enterprise Resource Planning) and precision solution provider Read More
Mixmate-featured-image
Decision Support SoftwareHandy Software, Hardware for the Field
June 7, 2017
More than two decades ago, Iowa grower Doug Applegate wished for a “little portable chemical blending system” that could easily Read More
Decision Support SoftwareHarnessing A Team To Build Your Own Software
June 7, 2017
What’s a powerhouse retail network to do when it can’t find a software system to meet incredibly diverse needs? Build Read More
Tim Ferrell Marshall County Co-op
Decision Support SoftwareWhen It’s Time To Switch Software
June 7, 2017
No one in their right mind wants to change software. That’s the opinion of Tim Ferrell, manager of Marshall County Read More