Opinion: Are We in a Precision L-Ag Moment?

Yes, you read that headline right. I said Precision Lag, as in I have this feeling we are in the waning phase of the excitement and craziness of this industry in this time frame. If you think this is the first time, you haven’t been in this industry long enough. I’ve personally seen it about three or four times in the last 20 years, but it is more apparent for some than for others. I don’t plan to go into when and what the past lags were all about, but being on the imagery side of this industry, I think I’ve seen the most. The current lag is due to drones being, well, drones, and people getting back to reality, but still kind of scared to be excited again. I see it passing slowly as a whole, so I want to dig into why this happens and what it means.

After attending InfoAg last week, the one thing that was very apparent is that all the pomp and circumstance has died down and the “outsiders” were not there in droves. It seemed like the good old days where everyone kind of knew their place and seemed content. No one was really putting out the next great tool or system and most were trying to build their relationships between each other. Also, consolidation was clearly in the air. That is a pure sign, but also the effect of the lag in precision ag. One main positive so far is that I didn’t see and haven’t seen as much lately what I call the Oprah paradox. YOU GET ____! YOU GET ____! EVERYONE GETS ____! Fill in the blank with yield, efficiency, more money, savings, etc. I’m actually getting excited for this new era, maybe.

When I say lag, I don’t mean we are falling behind either. It means we are getting tired and beat down by all the ideas, newcomers, possibilities, and just plain old crap. When I say we, I mean everyone in ag, too. All industries need a time like this. Heck, if it wasn’t for past lag times my dad wouldn’t have re-shifted his goals for our satellite imagery company and would’ve circled into some product no one wanted nor could use potentially. Instead, we would find new clients, new opportunities, and new partnerships that would give us a better understanding of our product. During these times, we also focused on building the right tools and fixing internal technical problems so that when the time was right, we could attack and scale our services. We hunkered down, became more efficient, and this made us stay in the game, especially in lower commodity times and/or industry hiccups like today.

These lag times also can bring a negative effect in that you are less likely to build things you want and talk to clients you would like. I’ve seen this as well with our past decisions and there really is no perfect answer. If you try to hunt down the next big thing now you very well could go down a rabbit hole and become MAD. If you try to reinvent yourself you might run out of gas. Your new clients and partnerships can turn in an instance since the economy is less reliable. Another person or company in the same position can burn you and steal the show from you. I’ve literally experienced this all. It is a big bag full of suck, but it has taught us some good lessons. Hence, I don’t really know the answer, just be careful and smart.

One of the issues and reasons this happens is either the game of farming isn’t all that great during a time frame, or that some part of your industry hyped up everything and ruined it for a time frame. Unfortunately, we are dealing with both of these realities to certain extents. What is positive still is that the precision ag industry is broader than it was before. We are not all a bunch of small companies with small ideas. There is established practices, hardware, software, and goals in precision ag. There are schools and colleges teaching precision ag and we have major outside industries and professions interested in it. General technology development is easier than ever. You don’t have to buy $100k worth of servers every two years (we have a few, they are great paper weights). Of course, now it costs the same to “cloud” it up, programmers want more than ever, and tech changes really fast. Heck, maybe it’s worse, but I digress. All in all, it still is a great time to be involved in precision ag, but I have several key points to go over to get through the lag:

  1. Stop saying what you have is better than everyone else.
    a. No one cares anymore. Take the stick out….
    b. Sell you, your experience, your people, not your ego.
  2. Develop something new, interesting, valuable
    a. Stop copying everyone else.
    b. Create actionable items and ROI.
  3. Don’t tell your clients they are not doing good enough or the right thing.
    a. They write the check my friend.
    b. They all have heard or tried it before in some form.
  4. Meet new clients and ask questions.
    a. Talk to your most unlikely potential clients and learn from them.
    b. Get to know a new territory or area (sorry, but it’s not just all corn and beans)
  5. Stop trying to change the world or feed it.
    a. You can’t do it all, you can only do your best with what you have.
    b. Stop following the ultimate answer or solve every problem.
  6. Live in the present.
    a. No need to blame the past, learn from it and do better.
    b. The future can screw you over, sell what you have and do it well.
  7. Be a Shark, not a Sheep.
    a. Trust your gut and go for it. Sharks don’t have necks so they don’t look back.
    b. Stop following the latest trend or topic, do what you believe in.

Naturally, I could go on and on, but these are some things I think all need to strive towards to get out of precision lag. It will subside. It will be better for some than others. It will take some groups out and open the doors for others. It will separate the best from the rest. It will drive you insane. It will challenge you. It will become the newest trendy word in the industry….ok, probably not. What it will do is make you think if it is real or not and where you fit in. Both are good and bad, just like the rest of everything so focus on what you know and don’t stop. Come to think of it, I believe Shark Week was during InfoAg this year. So, I guess that answers that. Hopefully, this all will help and I can be the proud Shepard of this herd of Sharks. Time will tell…

Leave a Reply

One comment on “Opinion: Are We in a Precision L-Ag Moment?

Business Management Stories
Univ.-of-Illlinois-Palmer-in-soybean1
Business ManagementOpinion: How to Leverage Precision Agriculture to Launch Your Aggressive, High-Pressure Telemarketing Business
August 14, 2017
To continue where my last article left off (which you can check out here), a precision ag company that specializes Read More
Corn
Business ManagementCrop Pro Insurance Closes $8 Million in Series A Funding
August 8, 2017
Crop Pro Insurance today announced the close of an $8 million Series A round of financing co-led by top agriculture Read More
Agri-AFC-cotton-baler
Business ManagementBringing a Southern Sensibility to Precision Agriculture
August 7, 2017
Amy Winstead considers herself blessed to have gotten in on the ground floor of precision ag adoption in the Southeast. Read More
Ed-Barnes-Featured
Business ManagementTop 10 Most Intriguing People in Precision Farming
August 1, 2017
Here at PrecisionAg® Professional we’re all about the numbers. And taking a look back at the numbers, it appears that Read More
Trending Articles
Agri-AFC-cotton-baler
Business ManagementBringing a Southern Sensibility to Precision Agriculture
August 7, 2017
Amy Winstead considers herself blessed to have gotten in on the ground floor of precision ag adoption in the Southeast. Read More
Sensors/IoT2017 Yield Monitor Calibration Checklist — Part I
August 4, 2017
With fall harvest a few weeks away for most of the country, ag service providers from every walk of life Read More
Wade-Barnes
Excellence AwardsBuilt By Agronomists: 2017 Award Of Excellence Winner Wade Barnes on the Making of Farmers Edge
August 2, 2017
Farmers Edge President And CEO Wade Barnes reflects on the process of building his company, shortly after receiving the Crop Adviser/Entrepreneur Award during the InfoAg Conference in July. Read More
Data ManagementInfoAg 2017 Recap: Service Providers Take Center Stage
July 28, 2017
As I sit here and ponder just what it was that we all experienced last week, off the top of Read More
Resistant-weeds-in-Brazil
InternationalUsing Precision Agriculture to Control Herbicide-Resistant Weeds in Brazil
July 24, 2017
The occurrence of weeds in agricultural fields of grain and fiber production has caused losses to farmers for a long Read More
Yield Data Image
Data ManagementYield Data: More Than a Pretty Picture
July 13, 2017
It is mid-July, which, for the Australian cotton industry, means that picking is still going on for some growers. A Read More
Latest News
Israel-Irrigation-system-featured-image
InternationalIsraeli Precision Ag Companies Lead in Water Use Effici…
August 16, 2017
In the last week, AgriHub, formed by farmers and consultants from Brazil, visited 10 Israeli agribusiness companies, including the Ministry Read More
Gregoire-tractor
ProfessionalsMechanization Key to the Future of Vineyard Management
August 15, 2017
Precision technology moves at different speeds across different segments of agriculture. For example, technologies like curve compensation, precision spraying, and Read More
Area-of-Interest-Web-Soil-Survey-screenshot
Data ManagementSignificant Updates Made to SoilWeb, Web Soil Survey Pr…
August 15, 2017
Agronomic professionals and technicians dealing with precision farming must understand the soils within the field before writing effective prescriptions.  A Read More
Univ.-of-Illlinois-Palmer-in-soybean1
Business ManagementOpinion: How to Leverage Precision Agriculture to Launc…
August 14, 2017
To continue where my last article left off (which you can check out here), a precision ag company that specializes Read More
Industry NewsFarm Dog Inks Non-Funded Cooperative Agreement with USD…
August 14, 2017
Farm Dog, a pest and disease management platform for growers and agronomists, has entered into a Non-Funded Cooperative Agreement (NFCA) Read More
Lisa-Prassack-Photo-Credit-Weekly-Times-Now
InternationalAgtech: What the Umbrella Term Really Means
August 10, 2017
Acclerator, incubator, start-up, connectivity — the buzzwords of the digital age can be clear as, well, mud, writes Alex Sampson Read More
Spray Drift
Data ManagementJanzen: Data to Play Key Role in Sorting Out Dicamba Di…
August 10, 2017
You would have to live under a rock to not have heard about farmers’ issues with dicamba this growing season. Read More
New-Zealand-Precision-Ag-Tour
InternationalNew Zealand Study Tour to Demonstrate Recent Advances i…
August 10, 2017
If you’re interested in an intense, week-long immersion in the use of high-tech products and practices in New Zealand agriculture, Read More
Data ManagementDuPont Acquires Ag Tech Startup Granular for $300 Milli…
August 9, 2017
DuPont announced that it has signed a definitive agreement to acquire San Francisco-based Granular, Inc., a provider of software and Read More
EventsSDSU Prof to lead Profit-Focused Panel at Upcoming Inno…
August 9, 2017
Convening a day prior to this summer’s Farm Progress Show at the I Hotel in Champaign, IL (about an hour’s Read More
AGCO White planter 9800VE
ProfessionalsAGCO Crop Tour 2017 Features Precision Planting Add-Ons
August 8, 2017
Higher yields and greater returns are the ultimate goals for crop producers. To help corn growers better understand the role Read More
Corn
Business ManagementCrop Pro Insurance Closes $8 Million in Series A Fundin…
August 8, 2017
Crop Pro Insurance today announced the close of an $8 million Series A round of financing co-led by top agriculture Read More
Agri-AFC-cotton-baler
Business ManagementBringing a Southern Sensibility to Precision Agricultur…
August 7, 2017
Amy Winstead considers herself blessed to have gotten in on the ground floor of precision ag adoption in the Southeast. Read More
Satshot imagery
Imagery/SensingImagery in Agriculture: Some Sage Advice
August 6, 2017
SatShot President Lanny Faleide has been a fixture on the remote imagery scene for as long as about anyone still Read More
Blue-River-See-Spray-technology
ProfessionalsHow Blue River’s See & Spray Technology Could Chang…
August 5, 2017
The blistering West Texas heat rocketing towards triple digits, the affable cotton grower trudged across his dusty field and approached Read More
Grower Services & Solutions2017 Yield Monitor Calibration Checklist — Part II
August 4, 2017
(EDITOR’S NOTE: This is Part II of Tim Norris’ Yield Monitor Calibration checklist, Part I of which was published in Read More
Sensors/IoT2017 Yield Monitor Calibration Checklist — Part I
August 4, 2017
With fall harvest a few weeks away for most of the country, ag service providers from every walk of life Read More
Bowles-Farming
ProfessionalsSoil Sampling in 2017: Data Driven
August 4, 2017
Generally speaking, any ag service provider’s most important job is to help grower-customers produce more with less. According to Jill Read More