Tennessee: ‘Sharp’ening The Program

Precision agriculture practices are finally starting to show a clear payout for growers in the Cotton Belt, thanks to the hard work of many growers, consultants, institutions, and manufacturers in strong collaboration. One of these individuals, Tim Sharp, was the subject of an in-depth profile in The Power and the Promise.

Sharp created and shaped a cotton precision program from scratch at Tennessee’s Jackson State Community College, driven by his sheer determination and salesmanship derived from more than a decade of work for manufacturer DuPont.

He and 15 students at the college started the efforts in 1998 with an eye toward bringing greater profitability to growers. Recording the relationship between field variability and plant growth and determining how to best use inputs to increase yield based on this relationship was the goal for Sharp and his students. But the early years were all about getting started.

“Precision agriculture programs are brutally expensive to operate, and really cash hungry when you are ramping up,” said Sharp in an interview last year. “So, you need to fund it like a startup company — beg, borrow, find grant money — it took better than $1 million for us to really get started.”

He was able to garner a wide range of support for the program, including distributor/retailers Helena Chemical and MFA Inc., seed company Delta & Pine Land, and software maker SST Development Group. The Cotton Foundation, Cotton Incorporated, the National Science Foundation, and USDA also lent support.

Field Of Vision

Sharp’s research into cotton production revolved around the theory that every field can be broken down into three basic zone types — high, medium, and low. In high zones, cotton will not only grow faster, but also produce an excess of vegetation to the detriment of actual bolls. On the other hand, cotton in low zones tends to grow more slowly and mature earlier.

Sharp and his team used satellite and aerial imagery early on to determine the growth rate of cotton in experimental fields using an imagery variable known as NDVI. This factor is a reflection of the amount of vegetation across a given field, allowing an agronomist to make distinctions between high, medium, and low zones.

Through extensive imagery analysis and painstaking ground truthing, the imagery proved successful in predicting plant vigor. The next step was to determine whether the zones would remain stable from year to year.

This past year was the fourth for the project, and Sharp is completely confident in the stability of the zone. “Clearly, the imagery works, and zones are consistent year to year,” says Sharp.

With zones of vigor identified, Sharp looked at ways to influence the plants in the zones by varying the planting rates, as well as insecticides and plant growth regulators through good, basic cotton growing practices.

In Sharp’s experiments, seeding rates are increased in high zones vs. low zones to take advantage of the favorable growing conditions. It’s an important factor with today’s expensive biotech hybrids that often also feature seed treatment.

Insecticide applications are focused in high zones where pest insects tend to colonize first, and low zones may get no application, both saving money and providing a refuge for beneficials to develop.

Plant growth regulators (PGRs) also are reserved for the high zones to reduce vigor and encourage boll development, and low areas may receive no PGR at all, again reducing input cost.

The vigor zone profile is the engine that drives this precision machine, and after four years of consistency — 96% of zones do not vary — mission plans can be developed for the field to match the zones.

The “mission plan” is a piece of software programming that is used to guide the variable-rate seeder or applicator throughout the season on where applications should be made. Since the zones are stable, the same mission plan can be used essentially for as long as the farmer is planting cotton in that field.

Next Steps

Sharp recently announced that he’s leaving Jackson State and taking his precision program to another southern university, but he pledges that the work will go on.

And there is much still to learn. One of the biggest challenges has been imagery consistency, a problem that he is trying to alleviate by using the Green-Seeker on-the-go imagery system.

“With satellite and aerial imagery, the NDVI from shot-to-shot can vary in resolution,” says Sharp. “With the ground-based sensor, you get output that is georeferenced right off the machine that’s ready to use, and the system works well off our mission plans.”

Sharp also wants to examine the effect of nitrogen rates and hybrid selection on the total mission as part of future research.

Another challenge is in trying to make the system as accessible and easy to use as possible, but Sharp says nearly all growers will need help implementing the system regardless.

“The grower does not have the time to learn this system — there really needs to be a technical expert in the loop to use the GIS system and build the mission plans,” says Sharp.

Even the consultant that implements Sharp’s program needs some special skills. “There are really three skills that a person needs to run this program — agronomy, computer skills, and some background in electronic engineering,” he said. “Even with my students, they are challenged in the electronic components area — you have to know exactly what to do when any of these components fail on you.”

Editor’s note: This article first appeared in the Winter 2004 issue of PrecisionAg Special Reports.

Leave a Reply

Your email address will not be published. Required fields are marked *

Growers Stories
Grower Services & SolutionsGrower Groups Encourage Implementation Of AgGateway’s ADAPT For Precision Ag
November 2, 2016
A dozen leading U.S. grower organizations are hailing the collaborative efforts that led to the new AgGateway ADAPT framework for Read More
Corn Field
Grower Services & SolutionsCorn Growers On Big Plots Are Most Tech-Savvy Of Farmers
October 20, 2016
U.S. corn farmers are proving themselves to be quick learners, writes Mario Parker on Bloomberg.com. Growers producing the grain on Read More
Grower Services & SolutionsVIDEO: Jim Case Multi-Hybrid Cropping System Update
October 19, 2016
We revisit with Central Ohio grower Jim Case and farm manager Nate Long (featured in the February 2016 Precision Ag Read More
DataUPDATE: Checking In on Jim Case’s Multi-Hybrid Ohio Harvest
October 10, 2016
YOU VERY WELL may remember central Ohio grower Jim Case from a cover story in Precision Ag Special Reports that Read More
Trending Articles
Kinze 4900 Multi-Hybrid Concept Planter
Business ManagementKinze Fights Deere, Feds To Block Release Of Trade Secrets
November 22, 2016
An antitrust lawsuit intended to block a small-scale deal between agricultural giants John Deere and Monsanto is putting an Iowa Read More
BusinessClimate Corp. Acquires European FMIS Company
November 21, 2016
Today, The Climate Corp., a subsidiary of Monsanto Co., announced the acquisition of VitalFields, a European farm management software company Read More
USDA UAV
Hort TechHigh-Tech Agriculture Continues To Reap Rewards For Farmers
November 11, 2016
Just like a smartphone helps users learn, communicate and make important decisions, smart technology — known as precision agriculture — Read More
BusinessTrimble Launches New FMIS Platform
November 7, 2016
Trimble announced today that it is consolidating three of its agriculture software products — Connected Farm, Farm Works Software and Read More
Grower Services & SolutionsGrower Groups Encourage Implementation Of AgGateway’s ADAPT For Precision Ag
November 2, 2016
A dozen leading U.S. grower organizations are hailing the collaborative efforts that led to the new AgGateway ADAPT framework for Read More
Events2016 Vision Conference: Things Overheard
October 27, 2016
Pardon the baseball pun (GO TRIBE!), but I think it’s safe to say that last week’s inaugural Vision Conference touched Read More
Latest News
TechnologyAgGateway Announces 2017 Board Of Directors And Leaders…
December 2, 2016
AgGateway has announced its leadership for the coming year, including the directors of its new Strategic Board and Operational Board, Read More
DataSentera Honored With Startup Award Of 2016 By Minnesota…
December 1, 2016
The Minnesota High Tech Association (MHTA) recently recognized Sentera as the 2016 Tekne Startup Award recipient. The MHTA Tekne Awards Read More
AGCO AgControl
TechnologyPrecision Ag Technology: Rate Control For The Times
December 1, 2016
It’s not surprising that the need for more economical, effective application is driving the demand for the latest rate controllers Read More
Farmers Edge Truck
DataFarmers Edge, Trotter Fertilizer Form Partnership To En…
November 29, 2016
Farmers Edge, a global leader in precision agriculture and independent data management solutions, has partnered with Trotter Fertilizer, Nebraska’s foremost Read More
Fall corn
BusinessInsecticide of the Future? Robotic Tanks With Lasers to…
November 22, 2016
*Article Notes: This monthly column takes some crazy sounding ideas and applies them to the field of Ag Tech. The Read More
Topcon X30 Console in cab
Sensors/IoTIoT The Focus Of New Topcon Partnership
November 22, 2016
Topcon Agriculture and SDF plan to enter into a non-exclusive long-term partnership agreement. This latest arrangement of Topcon with a Read More
Kinze 4900 Multi-Hybrid Concept Planter
Business ManagementKinze Fights Deere, Feds To Block Release Of Trade Secr…
November 22, 2016
An antitrust lawsuit intended to block a small-scale deal between agricultural giants John Deere and Monsanto is putting an Iowa Read More
BusinessClimate Corp. Acquires European FMIS Company
November 21, 2016
Today, The Climate Corp., a subsidiary of Monsanto Co., announced the acquisition of VitalFields, a European farm management software company Read More
BusinessFarmobile Releases Mobile Data Visualization Dashboard
November 17, 2016
Farmobile today announced an EFR Dashboard, a real-time dashboard that helps farmers visualize their field data and derive insights to Read More
Southern States
Best PracticesSouthern States: 5 Tips for Variable-Rate Seeding Succe…
November 15, 2016
Success comes from taking advantage of every opportunity you can. One technique used in precision farming, called variable rate seeding, Read More
USDA UAV
Hort TechHigh-Tech Agriculture Continues To Reap Rewards For Far…
November 11, 2016
Just like a smartphone helps users learn, communicate and make important decisions, smart technology — known as precision agriculture — Read More
THRIVE
BusinessCall For Ag Tech Startups: Apply To THRIVE’s Open…
November 10, 2016
THRIVE is looking for high growth ag tech companies with an in-market solution that are positioned to scale. The top 50 Read More
EquipmentJohn Deere Launching New Operations Center Apps, Mappin…
November 10, 2016
In an effort to enhance the functionality, ease-of-use and overall value of John Deere Operations Center to producers, John Deere Read More
ComputersTrimble, CLAAS Announce LEXION Combine Factory Option
November 9, 2016
CLAAS and Trimble announced the introduction of a Trimble Ready machine factory option for CLAAS LEXION combines. CLAAS assembles LEXION Read More
Claas RTK Field base
EquipmentClaas Extends Precision Farming Offering
November 8, 2016
To enable use of automatic steering systems where a real time kinematics (RTK) correction signal is either limited or not Read More
John Deere Operations Center
UncategorizedWxAgrios Integrates With John Deere’s Operations …
November 8, 2016
Precision Weather Solutions Inc. has announced it is the first company with a commercially available solution, WxAgrios, integrated with both John Read More
BusinessTrimble Launches New FMIS Platform
November 7, 2016
Trimble announced today that it is consolidating three of its agriculture software products — Connected Farm, Farm Works Software and Read More
Best PracticesPathways to Precision: Managing Risk With Germplasm
November 7, 2016
No one can know what the conditions will be for the next growing season. Is it possible for a grower Read More